Ammann ASC 200 Series, Operating Manual

Page: 125 / 198

125 ASC200/ASC250
3.1. Safety Standards at Lubrication and Maintenance
3.1.1. Safety during maintenance
Lubrication, maintenance and adjustment process:
•
use qualified personnel.
•
according to safety instructions in the Operating
manual for the vibration roller.
•
according to intervals in the lubrication table accor-
ding to working hours.
•
on the Machine located on flat solid surface, secured
against self-motion (with scotch blocks) and this
always with the engine OFF, key removed from igniti-
on, and with the wiring disconnected.
•
with the machine parts cooled off.
•
after cleaning the machine, the lubricating and main-
tenance points, and spots to be repaired.
•
with proper undamaged tools.
•
by replacing parts with new original ones. The manu-
facturer cannot be responsible for damages caused
by using different units or parts.
•
under proper illumination of the machine when wor-
king at reduced visibility or at night
•
in case the work involves removing covers and safety
cartridges, reassemble them after completing the
work
•
retighten bolts with applicable torque and check tight-
ness of the joints.
•
pay attention not to get burnt after heating up fluids -
use recommended fills.
Operations performed while the
engine is running (adjusting)
must be performed with anoth-
er person present. This person
must have immediate access to
the emergency stop and must
be in permanent communica-
tion contact with the adjusting
person so that the engine can
be stopped immediately, if nec-
essary.
3.1.2. Fire safety during changing
contents
•
From fire safety point of view, inflammable liquids
used in the machine are classified into following
classes:
II class of fire danger - Diesel
IV. class of fire danger - mineral oils, lubrication gre-
ases
•
The location of oil change operation must not conflict
with places subject to explosion or fire hazard.
•
It must be marked by tables and signs prohibiting
smoking and open flame.
•
The manipulation area must be of such design and
dimensions so that it can contain the amount of
inflammable liquid equal to the content of the largest
tank or transport package.
•
The site must be equipped with portable fire extinguis-
hers.
•
Metal barrels, canisters or tin cans should be used for
handling oils or Diesel fuel.
•
Transport containers must be duly closed while being
stored.
•
The containers must have one opening, they must
always be stored with the opening upside and secu-
red against leaks.
•
The containers must be marked by permanent signs
showing the content and the class of fire danger.