Ammann ASC 200 Series, Operating Manual

Page: 171 / 198

171 ASC200/ASC250
MAINTENANCE MANUAL
1
Every 2000 Hours or Every 2 Years Every 2000 Hours or Every 2 Years
ALTERNATIVE FILLING THROUGH THE TANK FILLER
NOTE
You can order a filling device at the manufacturer of the
machine or your dealer.
! NOTE !
After filling the circuit, check whether
signal lamp doesn‘t shine.
! NOTE !
Start the engine and run functions of the
machine at increased engine speed to
let circuits fill.
Check tightness of filter, temperature
sensor, suction hose and cover.
Keep the machine clean. Avoid polluting
the system with materials that may
damage important units!
Follow the fire safety measures!
Do not open the hydraulic tank unneces-
sarily!
Exchange oil and filter always, when
inner part of a unit (hydromotors, hydro-
generators) were destroyed or after a
considerable repair of hydraulic system.
Clean and rinse the hydraulic tank be-
fore assembling a new unit. Exchange
filter.
Do not use chemical detergents to clean
the tank.
Use clothes not loosing staples to clean
it.
Use oils in accordance with chapter
3.2.4.
! NOTE !
The alternative way of filling the hydrau-
lic circuit is only emergency solution!
When filling through the tank filler, large
amount of old dirty oil remains in the
circuit, which reduces lifetime of hydrau-
lic units.
In this way of filling it is necessary to cut
the next exchange interval to one half,
i.e. 1000 h or 1 year.
The cap of the tank filler is sealed. In
case of breaking the seal during warran-
ty period, the warranty expires.
•
Refill the tank through 1 the filler with specified type of
oil up to the bottom of the strainer in the filler.