Ammann ASC 200 Series, Operating Manual

Page: 144 / 198

144 ASC200/ASC250
3.6. Individual Operations of Maintenance
•
Turn the ignition key to I position. Signal lamps 18, 19,
20, 21, 22, 23, 24 will light up.
•
ECM signal lamps 18, 19, 20, 21 go off after 3 seconds.
•
Start the engine - signal lamp 22 must go off and test
the emergency brake 5 and signal lights 23.
Continuously check devices
and signal lights during opera-
tion
Repair any indicated defects
immediately!
Announce starting the engine
by the acoustic signal!
Check before starting of the
engine that nobody is endan-
gered!
Give the acoustic signal before
starting driving the machine and
wait for period sufficiently long
for all persons being able to
leave the area around the ma-
chine (area under the machine)
in time!
Make sure that the area in front
and in the back of the machine
is free and that no persons are
present in this area!
Every 20 Hours or Daily Every 20 Hours or Daily
3.6.9. Checking warning and control
devices
•
Turn on switches 31, 32, 33, 34, 35, 36, 37, test the
horn, beacon and lights.