Industry Cellular Gateway
2.3.1 WiFi Configuration
Due to optional module(s) and frequency band, you need to setup module one by one. For each module, you
need to specify the operation mode, and then setup the virtual APs for wireless access.
Hereunder are the scenarios for each wireless operation mode, you can get how it works, and what is the
difference among them. To connect your wireless devices with the wireless gateway, make sure your
application scenario for WiFi network and choose the most adequate operation mode.
AP Router Mode
This mode allows you to get your wired and wireless
devices connected to form the Intranet of the wireless
gateway, and the Intranet will link to the Internet with
NAT mechanism of the gateway. So, this gateway is
working as a WiFi AP, but also a WiFi hotspot for
Internet accessing service. It means local WiFi clients
can associate to it, and go to Internet. With its NAT
mechanism, all of wireless clients don’t need to get
public IP addresses from ISP.
87
