Amit IOG761 User Manual Download

Page: 73 / 395

Industry Cellular Gateway

Port-based VLAN Configuration

Item

Value setting

Description

Name

1. A Must filled setting

2. String format: already

have default texts

Define the

Name

of this rule. It has a default text and cannot be modified.

VLAN ID

A Must filled setting

Define the VLAN ID number, range is 1~4094.

VLAN Tagging

Disable

is selected by

default.

The rule is activated according to

VLAN ID

and

Port Members

configuration

when

Enable

is selected.

The rule is activated according

Port Members

configuration when

Disable

selected.

NAT / Bridge

NAT

is selected by default.

Select

NAT

mode or

Bridge

mode for the rule.

Port Members

These box is unchecked by

default.

Select which LAN port(s) and VAP(s) that you want to add to the rule.

Note: The available member list can be different for the purchased product.

Summary of Contents for IOG761












































































































































































































































































































































































































Search results

Summary of Contents for IOG761

Reviews:

Related manuals for IOG761

Brands by name

Popular brands

Amit IOG761, User Manual

Search results

Summary of Contents for IOG761

Reviews:

Related manuals for IOG761

Brands by name

Popular brands