Industry Cellular Gateway
any text
2. A Must filled setting
Value Range
:
1 ~ 30 characters.
From Interface
1. A Must filled setting
2. By default Any is
selected
Define the selected interface to be the packet-entering interface of the router.
If the packets to be filtered are coming from
LAN to WAN
then select LAN
for
this field. Or
VLAN-1 to WAN
then select
VLAN-1
for this field. Other examples
are VLAN-1 to VLAN-2. VLAN-1 to WAN.
Select
Any
to filter packets coming into the router from any interfaces.
Please note that two identical interfaces are not accepted by the router. e.g.,
VLAN-1 to VLAN-1.
To Interface
1. A Must filled setting
2. By default Any is
selected
Define the selected interface to be the packet-leaving interface of the router. If
the packets to be filtered are entering from
LAN to WAN then
select
WAN
for
this field. Or
VLAN-1 to WAN
then select
WAN
for this field. Other examples are
VLAN-1 to VLAN-2. VLAN-1 to WAN.
Select
Any
to filter packets leaving the router from any interfaces.
Please note that two identical interfaces are not accepted by the router. e.g.,
VLAN-1 to VLAN-1.
Source IP
1. A Must filled setting
2. By default Any is
selected
This field is to specify the
Source IP address
.
Select
Any
to filter packets coming from any IP addresses.
Select
Specific IP Address
to filter packets coming from an IP address.
Select
IP Range
to filter packets coming from a specified range of IP address.
Select
IP Address-based Group
to filter packets coming from a pre-defined
group. Note: group must be pre-defined before this option become available.
Refer to
Object Definition
>
Grouping > Host grouping.
You may also access to
create a group by the
Add Rule
shortcut button.
Destination IP
1. A Must filled setting
2. By default Any is
selected
This field is to specify the
Destination IP address
.
Select
Any
to filter packets that are entering to any IP addresses.
Select
Specific IP Address
to filter packets entering to an IP address entered in
this field.
Select
IP Range
to filter packets entering to a specified range of IP address
entered in this field.
Select
IP Address-based Group
to filter packets entering to a pre-defined group
selected. Note: group must be pre-defined before this selection become
available. Refer to
Object Definition
>
Grouping > Host grouping.
You may also
access to create a group by the
Add Rule
shortcut button. Setting done through
the
Add Rule
button will also appear in the
Host grouping
setting screen.
Source MAC
1. A Must filled setting
2. By default Any is
selected
This field is to specify the
Source
MAC
address
.
Select
Any
to filter packets coming from any MAC addresses.
Select
Specific MAC Address
to filter packets coming from a MAC address.
Select
MAC Address-based Group
to filter packets coming from a pre-defined
group selected. Note: group must be pre-defined before this selection become
available. Refer to
Object Definition
>
Grouping > Host grouping.
You may also
access to create a group by the
Add Rule
shortcut button.
Protocol
1. A Must filled setting
2. By default Any(0) is
selected
For
Protocol
, select
Any
to filter any protocol packets
Then for
Source Port
, select a predefined port dropdown box when
Well-known
Service
is selected, otherwise select
User-defined Service
and specify a port
range.
264
