Industry Cellular Gateway
Create / Edit QoS Rules
After enabled the QoS function and configured the system resources, you have to further specify some QoS
rules for provide better service on the interested traffics. The gateway supports up to a maximum of 128 rule-
based QoS rule sets.
When
Add
button is applied,
QoS Rule Configuration
screen will appear.
QoS Rule Configuration
Item
Value setting
Description
Interface
1. A Must filled
setting.
2.
All WANs
is
selected by default.
Specify the WAN interface to apply the QoS rule.
Select
All WANs
or a certain
WAN-n
to filter the packets entering to or leaving
from the interface(s).
Group
1. A Must filled
setting.
2.
Src. MAC Address
is selected by default.
Specify the
Group
category for the QoS rule. It can be
Src. MAC Address
,
IP
, or
Host Name.
Select
Src. MAC Address
to prioritize packets based on MAC;
Select
IP
to prioritize packets based on IP address and Subnet Mask;
Select
Host Name
to prioritize packets based on a group of a pre-configured
group of host
from the dropdown list.
If the dropdown list is empty, ensure if any
group is pre-configured.
Note:
The required host groups must be created in advance and corresponding
148
