Amit IOG761 User Manual Download

Page: 147 / 395

Industry Cellular Gateway

Setup System Resource

System Resource Configuration

Item

Value Setting

Description

Type of System

Queue

1. A Must filled setting.

Bandwidth Queue

and

are set by default.

Define the system queues that are available for the QoS settings.

The supported type of system queues are

Bandwidth Queue

and

Priority

Queues.

Value Range

1 ~ 6.

WAN Interface

WAN-1

is selected by

default.

Select the WAN interface

and then the following

WAN Interface Resource

screen

will show the related resources for configuration.



Bandwidth of Upstream / Downstream

Specify total upload / download bandwidth of the selected WAN.

Value Range:

For Gigabit Ethernet:1~1024000Kbps, or 1~1000Mbps;

For Fast Ethernet: 1~102400Kbps, or 1~100Mbps;

For 3G/4G: 1~153600Kbps, or 1~150Mbps.



Total Connection Sessions

Specify total connection sessions of the selected WAN.

Value Range:

1 ~ 10000.

Save

N/A

Click the

Save

button to save the settings.

Each WAN interface should be configured carefully for its upstream bandwidth, downstream bandwidth and

maximum number of connection sessions.

147

Summary of Contents for IOG761












































































































































































































































































































































































































Search results

Summary of Contents for IOG761

Reviews:

Related manuals for IOG761

Brands by name

Popular brands

Amit IOG761, User Manual

Search results

Summary of Contents for IOG761

Reviews:

Related manuals for IOG761

Brands by name

Popular brands