5800 SE 78th St. Ocala, FL 34472
42
P: (800) 327-3015
Modular HURRiCHiLL Installation & Operations Manual
Replace Optional Sanitizing Ozone Generator Lamp
The UV lamp inside the ozone generator has a service life of one year. Contact the parts department at American
Panel Corporation to order replacement lamps. To replace the lamp follow the steps below.
Step
Description
Action
1
Disconnect the unit from the main electrical power
2
Open the evaporator door. The evaporator door is the sheet
metal that houses the evaporator fans. To open it remove the
screws located on the right-hand side of the evaporator door,
opposite to the hinges. The ozone generator is mounted on
the inside of the evaporator door
3
Remove the old lamp by gently pushing the lamp from the
bottom side until enough of it is to grab.
4
Extract the lamp from the top, pull to disconnect the wire
harness, and replace the lamp
5
Close and secure the evaporator door.
6
Reconnect the main electrical power to the unit.
7
Test the Sanitation cycle. To do so engage the sanitation cycle
and let it run for 5 to 10 minutes. There will be a strong ozone
smell inside the cabinet
