5800 SE 78th St. Ocala, FL 34472
32
P: (800) 327-3015
Modular HURRiCHiLL Installation & Operations Manual
Connect to Controller - Wi-Fi
The optional wireless pc communication package is required to connect to the controller.
The controller is set from the factory as a Wi-Fi access point. In this configuration the controller broadcasts an SSID
such as blast-chiller-xxxxxxxxxxx-wha.
Step
Description
Action
1
Connect to the controller through the Direct Connection steps
outlined on pg 28. Once connected on a browser, complete the
steps below
2
Press the “Go to config” button at the bottom of the screen.
3
Make sure the “Device config” tab is selected
Enter the desired name for your HURRiCHiLL device.
4
Select the “Profiles” tab
5
Enter the SSID for your wi-fi network
Choose the correct security type for your network
Enter your network security key (password)
Enter 0 in Profile Priority
Click the “Apply” button to save all the changes
Click the “Go to application” button to go back to the main
screen.
6
Reset power to the unit and allow few minutes for the controller
to connect to the Wi-Fi network.
