American Dryer Corp. PHASE 7 OPL User Manual Download Page 16 | Manualshive

Page: 16 / 63

background image

13

H. CYCLE IN PROGRESS TEMPERATURE DISPLAY

While the dryer cycle is in progress, the temperature in the basket (tumbler) can be displayed by pressing and
holding the “UP-ARROW” Key. The temperature will be displayed in either Fahrenheit (ºF) or Celsius (ºC),
depending on what the system temperature has been set for in “Dryer Setup”.

I. TEMPERATURE CONVERSION STATUS

Temperature related programs are programmable to be operated in either Fahrenheit (ºF) or Celsius (ºC).
The Temperature selection is made in “SYSTEM TEMP”. Programs affected are:

1.

Temperature Display Mode

2.

Temperature Selections (drying temperatures)

3.

Cool Down Temperatures

IMPORTANT:

When changing the temperature conversion status from Fahrenheit or Celsius or
vice versa, ALL the Temperature Selections and Cool Down Temperatures will be
changed accordingly. The Phase 7 OPL microprocessor controller (computer)
automatically calculates and converts the temperatures in these programs to the
previously set value. For example, when changing from ºF to ºC, if the
preprogrammed Cycle “A” drying temperature was set for 160ºF, the Phase 7 OPL
microprocessor controller (computer) will change to 71ºC (+/- [1] one-degree
Celsius).

«
...
14
15
16
17
18
...
»

Summary of Contents for PHASE 7 OPL
































































Reviews:

No comments

Related manuals for PHASE 7 OPL

Tasti-Crisp DFAF755

Brand: Dash Pages: 21

Brand: Monogram Pages: 24

Brand: Ultrean Pages: 12

BELLEZZA Belle Phon Professional HTD8270

Brand: DCG Pages: 12

Brand: IRIT Pages: 2

Brand: B-TEC Pages: 11

Brand: Adler Europe Pages: 68

Brand: Saivod Pages: 35

Brand: Crosley Pages: 14

Brand: TEFAL Pages: 11

Brand: Hoover Pages: 120

Brand: CaterChef Pages: 12

PULVIS MINI SPRAY GB210A

Brand: Yamato Pages: 58

Brand: Alliance Laundry Systems Pages: 34

Mediflow Logyc Dry

Brand: Mediclinics Pages: 17

Brand: Mediclinics Pages: 80

Brand: Electrolux Pages: 44

Brand: Electrolux Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands