Amek 51 Media, User Manual

Page: 81 / 104

Format / Speaker Mute
Format (Upper Bank)
Press the FORMAT/SPK MUTE switch (LED ON), then select one of the LCRS , 5.1 or 7.1 switches
from the row immediately below depending on which format you require.
In this example we are using
5.1 [Fig 3.2].
Spk Mute (Lower Bank)
Check that the SPK MUTE LEDs correspond to the selected mode. In this case the only active
mutes (LED ON) should be NFL/LC and NFR/RC .
Note:
To mute any speaker individually, select the relevant SPK MUTE switch (LED ON).
Note:
Check the Master Mute is off.
Nearfield
To activate the Near Field monitors the NF switch must be selected (LED ON) whilst the
FORMAT/SPK MUTE mode is active [Fig 3.2].
Two sets of nearfield monitors can be used. The NF SPK2 switch presets NF1 or NF2 . The NF
switch always performs nearfield activation.
Note:
If the NF switch is NOT selected, the main speaker defaults are applied.
Note:
In all modes except 7.1 , all Nearfield speaker outputs are a “derived” stereo mix
consisting of the various elements in the monitor mix.
In 7.1 mode:
•
Nearfield Speaker 1 outputs are a “derived” stereo mix of the various elements in the
monitor mix except LC and RC .
•
Nearfield Speaker 2 outputs are used for the LC and RC signals.
79
User Guide
N
N
N
N