Amek 51 Media, User Manual

Page: 22 / 104

Mix to Tks
This feature assigns the Mix Path signal to the Multitrack Routing instead of the Channel Path
signal.
Note:
The Channel pan pot is still available to assign to the Stereo Buss .
Note:
This function is over-ridden by both Aux 3&4 to Tks and 1:1 switches.
Aux 3&4 to Tks
This feature disconnects Aux 3&4 level controls from the Aux Busses and feeds
them directly to the Multitrack Busses , effectively expanding the number of
auxiliary busses (if required).
Note:
This function is over-ridden by the 1:1 switch.
Note:
Both the LCRS and SS switches over-ride Busses 1-6 , leaving the Aux
Sends addressing multitrack busses 7-12 only.
LCRS
This feature is only used for Multi-Format work. When operated, the LCRS
switch reconfigures Multitrack Busses 1–4 to follow the LCRS panning. The
busses are assigned as follows:
•
Left = Buss 1
•
Right = Buss 2
•
Centre = Buss 3
•
Surround = Buss 4
SS
This feature is only used for Multi-Format work. When operated, the SS (stereo surround) switch
reconfigures Multitrack Busses 5–6 to follow the LCRS panning. The busses are assigned as
follows:
•
LS = Buss 5
•
RS = Buss 6
•
5+6 = Buss 4
Note:
The Stereo Surround signals are derived directly from the Surround signal. The Sub (LFE)
signal is derived from the post-fade signal.
20
User Guide
N
N
1
(L)
2
(R)
3
(C)
4
(S/LFE)
5
(LS)
6
(RS)
7 8
9 10
11 12
LCRS
SS
MIX
TKS
MIX
ST
CH
ST
AUX
TKS
3&4
N
N
N