86
Below is an explanation of the fields on the Register settings screen:
•
Enable: This checkbox allows the user to enable the Register feature for the DVR.
•
No: This dropdown box allows the user to select the proxy number. Currently the DVR can only configure one
proxy.
•
Server IP Address: This field allows the user to enter the proxy server IP address.
•
Port: This field allows the user to enter the proxy port number.
o
Note: Do not enter a network default port
for this port number. It may result in a port conflict.
•
ID: This field allows the user to enter the proxy ID number.
To revert to default settings, click the Default button near the bottom left hand corner. To confirm settings, click
the Save button near the bottom right hand corner. To cancel any modifications, click the Cancel button near the
bottom right hand corner. To apply the settings, click the Apply button near the bottom right hand corner.
4.10.2.12 Alarm Center
The alarm center feature is used to allow users to connect the DVR to their alarm server, so the server can
receive a notice when certain events happen. One common use for the alarm center is to send daily reports on
the s
tatus of the DVR’s connection to the network. Below is a screenshot of the Alarm Center settings screen:
Summary of Contents for AMDVTENL8
