Amcrest AMDVTENL8, User Manual

Page: 159 / 199

159
Below is a description of the fields on the Video Loss settings page:
Parameter Function
Enable This checkbox allows the user to enable the video loss function for a specific
channel.
Period This setup button takes the user to the video loss period settings screen.
Record
Channel This checkbox allows the user to enable the system to record video for that
channel when a video loss alarm is triggered.
Record Delay This field specifies in seconds how long the delay between alarm activation and
PTZ activation should be.
PTZ Activation This checkbox allows the user to enable the system to activate PTZ movement
when a video loss alarm is triggered. To setup the PTZ activation settings, click the
setup button next to PTZ activation.
On the PTZ Activation screen, each camera can be setup to perform a preset
PTZ action based upon video loss.
Tour This checkbox allows the user to enable the system to cause a PTZ tour to occur
when a video loss alarm is triggered. Multiple cameras can be specified to
perform a tour.
Snapshot This checkbox allows the user to enable the system to take a snapshot when a
video loss alarm is triggered. Multiple cameras can be specified to perform a tour.
Alarm out This checkbox allows the user to enable the system to upload alarm information
when a video loss alarm is triggered.
Buzzer This checkbox allows the user to enable the system to activate a buzzer when a
video loss alarm is triggered.
Show message This checkbox allows the user to enable the system to show an on-screen message
when a video loss alarm is triggered.
To copy settings to another channel, click the Copy button. To confirm settings, click the Save button. To refresh
the page, click the Refresh button. To revert to default settings, click the Default button.
5.4.3.1.3 Camera Masking