Amcrest AMDVTENL8, User Manual

Page: 151 / 199

151
•
Open the tree list on the MG-SOFT MIB Browser. This software shows device configuration. Using this
software, the user can see how many video channels and audio channels the device has, as well as view
other information about the DVR.
Note: SNMP port number and Trap number should not be the same, as it will cause a port conflict and neither will
work.
Below is an explanation about the different fields in the SNMP settings screen:
•
Enable: This checkbox allows the user to enable the SNMP feature for the DVR.
•
SNMP Port: This field allows the user to specify which port is used for SNMP.
•
Read-Community: This field allows the user to specify which user community has read access.
•
Write-Community: This field allows the user to specify which user community has write access.
•
Trap Address: This field allows the user to enter the IP address of the PC running the MIB software.
•
Trap Port: This field allows the user to enter the port number of the PC running MIB software.
•
SNMP Version: These checkboxes allow the user to select which versions of SNMP are used.
To revert to default settings, click the Default button near the bottom left hand corner. To confirm settings, click
the Save button near the bottom right hand corner. To cancel any modifications, click the Cancel button near the
bottom right hand corner. To apply the settings, click the Apply button near the bottom right hand corner.
5.4.2.10 Multicast
Multicast is a feature that enables the DVR to broadcast it’s live view to multiple computers on the same network.
Below is a screenshot of the multicast screen:
Below is an explanation of the fields in the Multicast settings screen:
•
Enable: This checkbox allows the user to enable the Multicast feature for the DVR.
•
IP Address: This field allows the user to enter the multicast IP address.
•
Port: This field allows the user to enter the port number for the multicast IP address.
For more information on how to configure multicast, see the information below.
Multicast IP Address Range (IPV4): 224.0.0.0 through 239.255.255.255
Well-known IPv6 multicast addresses
Address Description
ff02::1 All nodes on the local network segment
ff02::2 All routers on the local network segment
ff02::5 OSPFv3 All SPF routers