EN
8
aView
The aView displays the video image from the aScope 3. During start up, aView powers up and configures the aScope 3. If the aView battery icon on the
screen changes from fully charged to low battery (red battery) within 30 minutes, aView must be replaced.
Monitor Casing
Touch Screen
Displays the image
from the camera and a
touch screen interface.
ON/OFF button
Push button for power
ON before procedure
and power OFF after
procedure.
Input/output connections
Composite and USB
interface
Blue socket
for the aScope 3
cable. Protected by
a rubber cover
Power supply
Powers the system and charges
the battery. Power cord with
country-specific plug
Stand
To place the aView
on a solid surface.
Hexagonal key
To tighten the bolt
on the bracket
Bracket
Secures the monitor
to e.g. an IV pole
Pouch hook
Slide the hook through the
3 holes on the bracket. It
can now be used to hold
the aScope 3 pouch (hole in
top corner) for easy storage
before and during use.
Power
Power socket for
charging aView.
Protected by a
rubber cover
Docking connector
Connector for connection
to aView Docking Station.
2.3 Explanation of symbols used
Symbols for the aScope 3 devices
Indication
60 cm/23.6"
Working length of the aScope 3 insertion cord
Max OD
Maximum insertion portion width (Maximum outer diameter)
Min ID
Minimum working channel width (Minimum inner diameter)
Field of view
Do not use if the product sterilisation barrier or its packaging is damaged
The product does not contain natural rubber latex
Connection for the aScope 3 devices
Electrical Safety Type BF Applied Part.
Use By, followed by YYYY-MM
Sterile Product, Sterilisation by ETO.
Single use product, do not reuse
