Technical Information
43
801-9309.doc
To Configure Your Computer
The following is one way to configure the serial port of your computer; you may have
your own devices or means of making the communications connection.
Do this...
Observe...
launch HyperTerminal from Programs >
Accessories > Communication (or other serial
communication application)
enter a ‘connection name’ such as
EASYHEATComm then select:
•
COM1
•
38400 baud (must match selection above)
•
8 data bits; parity = none; stop bits = 1
•
flow control NONE
click OK, save file and close HyperTerminal
re-open HyperTerminal; open the saved file
attach the converter kit (9 –pin D-submin
adapter) to your COM1 port
attach RJ-45 modular plug to lower port at rear
of EASYHEAT
Configuration of your PC/converter must follow:
Data device type
Comm Mode
DCE
SIM
TxON/RxON
