How Your E
ASY
H
EAT
Works
18
Touch-panel features
START/STOP
When starting the unit from the front panel, use these buttons to (de)activate heating.
Press
START
to begin induction heating.
HeatOn (LED) shines and the display
is updated with operating data.
START
operates only within
HOME
zone
Press
STOP
to halt induction heating (2-button start type, below). The unit
returns to
Ready state. (STOP signal from front or rear panel always halts
induction heating)
Next
Use it to move the display pointer (
►
)
from one data field to the next. For
example, the display first looks like
this:
To program a heating time, press
►
once; the
pointer is to the left of the ‘Untimed’ message.
Any following adjustments will apply to the
timer.
Up/Down
Within the
Home
zone, these are used to adjust Setpoint and Timer (indicated
with the display pointer).
Within the
Control
zone (below), use either button to ‘replay’ the start-up
screens (to review firmware version), to adjust the RF-Set figures or to display
Setup sub-fields.
To adjust
Setpoint or Timer, you can press once to make a single-step adjustment, or you
can hold the button to scroll quickly to a new value.
Page
From within the
Home
zone, pressing this button moves to the
Control
zone
(see map) if the equipment is
Ready. Pressing page during
HeatOn displays
the internal temperatures and notices.
Within the
Control
zone, this button is used to select and exit the feature fields.
Home
This button takes you back to the
Home
zone, no matter where you have
navigated in the touch-pad map.
If you are already at the
Home
zone, pressing this button switches between
displayed output current (A) and displayed output Watts (W).
►0.0A Untimed
0.0A *0kHz
0.0A ►Untimed
0.0A *0kHz
