Ambiano GT801-M091, User Manual

Page: 32 / 67

Troubleshooting
32
are waived in the event of repairs performed by the user
or incorrect operation.
Some problems may be caused by minor faults that you can fix yourself.
To do so, follow the instructions in the following table. If it is still not possible
to resolve the problem, contact customer service. Do not repair the pressure
cooker yourself.
Problem Possible cause Solution
The lid
4
does
not close properly.
The silicone sealing
ring
6
is not fitted
correctly.
Reassemble the silicone sealing
ring correctly.
The lid cannot be
opened.
The pressure has not
been fully released.
Allow the pressure to release
naturally, or turn the pressure
regulator
3
to the “Exhaust”
position.
The float valve 1
has not dropped
down.
Use a cocktail stick to push it
down, jiggle the lid and allow the
steam to escape.
“E1” shows on the
display.
Sensor error Unplug the pressure cooker and
allow it to rest for 20 minutes
before using it again. Contact
after sales support if the problem
persists.
“E2” shows on the
display.
Short circuit of the
sensor
Unplug the pressure cooker and
allow it to rest for 20 minutes
before using it again. Contact
after sales support if the problem
persists.
“E3” shows on the
display.
The pressure cooker is
overheated.
Ensure there is enough food and
liquid inside the pot.
Ensure the pot is properly placed
inside the base unit.
Switch the pressure cooker off
and let it cool down for
20 minutes before using it again.
Contact after sales support if the
problem persists.
“E4” shows on the
display.
The pressure
regulator is not
working properly.
Contact after sales support for
repair. Do not repair the pressure
cooker yourself.