Ambiano GT801-M091, User Manual

Page: 27 / 67

Keep warm function
27
positioning marker
5
aligns with the “OPEN” mark on the base unit 11
(see
Fig. F
).
10. Lift the lid open and remove the pot from the base unit.
11. Let the milk in the pot cool to 109 °F (43 °C).
Monitor the milk temperature with a food thermometer. If reheating is
necessary, use the “sauté” cooking mode (see chapter “Sauté”, steps 2–3).
Culturing
1. When the milk has reached the required temperature of 109 °F (43 °C), add
active yogurt culture in the milk.
2. Return the pot
8
to the base unit
11
and properly close the lid
4
.
The pressure regulator 3 can be turned to either “Airtight” or “Exhaust”
position.
3. Press the YOGURT button (a cooking mode button 23 ).
When the “yogurt” mode is selected, the corresponding indicator light of
the button will blink. You will see “08:00” (8 hours) on the display
21
which
stands for the cooking time in the default preset program (normal).
The default culturing time is 8 hours. For a lower-lactose yogurt, the time
can be set to 24 hours (preset program “Less”) or adjusted by pr 20
or – button
22
(from 8 to 24 hours) according to your own recipe.
4. Wait for a few seconds until the indicator light stops blinking and three beep
sounds are heard. The pressure cooker will start cooking.
You will see the remaining cooking time on the display.
5. When culturing is done, you will hear a beep sound and see “yogt” on the
display. Press the CANCEL button 25 to turn off the pressure cooker.
6. Transfer the yogurt to a container and keep the yogurt in a fridge.
Keep warm function
1. After cooking is done, the pressure cooker will automatically activate the
keep warm function.
The indicator light of the KEEP WARM button
25 will turn on and the keep
warm icon ( ) 30 will show. The display will show the elapsed keep warm
time.
The keep warm function is not available to the yogurt cooking mode.
2. To stop the keep warm function, press the CANCEL button 25 .
The indicator light and the keep warm icon will turn off and the pressure
cooker will return to the standby (OFF) mode.
3. If you want to activate the keep warm function again, press the KEEP WARM
button and wait until three beep sounds are heard. The pressure cooker will
start the keep warm function.