Storage
31
5. Reassemble the silicone sealing ring onto the steel frame after cleaning.
Push them onto the center post
39
on the underside of the lid (see
Fig. M
).
Cleaning the accessories
− Remove the condensation collector
14
from the base unit
11
and then
empty and wash it thoroughly. Let it dry completely and return it back to the
original position.
− Clean the rice spatula
18
, soup ladle
19
, measuring cup
17
and
steaming rack
16
in soapy water with a non-abrasive sponge. Rinse and
dry them thoroughly.
Replacing the silicone sealing rings
− The silicone sealing ring
6
, float valve sealing ring
38
and silicone
washer
40
are wearable parts and must be replaced if damage is found.
− Contact the manufacturer for replacement using the service address
specified on the warranty card.
Any other servicing should be performed by an authorized
service representative.
Storage
All parts must be completely dry before being stored.
− Always store the pressure cooker in a cool, dry and clean area.
− Protect the pressure cooker from direct sunlight.
− To reduce wear and tear on the silicone sealing ring
6
, place the lid
4
upside down or loosely on the pressure cooker for storage.
− Store the pressure cooker so that it is not accessible to children.
Troubleshooting
NOTICE!
Risk of damage!
Improper handling of the pressure cooker may result in damage
to the pressure cooker.
− Do not open the housing of the pressure cooker; instead,
have qualified professionals perform any repairs. Contact
a qualified workshop for this. Liability and warranty claims
Summary of Contents for GT801-M091
Page 34: ...34...
