Amazone UF 1201, Operating Manual

Page: 156 / 220

Using the machine
UF with HB volumetric remote control, see also page 66!
1. Prepare and stir the spray liquid correctly in
accordance with the instructions from the
crop protection agent manufacturer. Refer
to the section "Preparing the spray liquid",
Seite 138.
2. Set the desired stirring stage (normally stir-
ring stage "2"). Refer to the "Agitator" sec-
tion, page 70.
3. Switch on the operating terminal.
4. Fold out the sprayer boom, see page 85.
5. Depending on the nozzles being used, set
the working height of the sprayer boom
(gap between the nozzles and the crop) ac-
cording to the spray table.
6. Move switch tap
F
to position
0
.
7. Move switch tap
E
to position
0
.
8. Move switch tap
D
(optional) to the
position.
9. Move switch tap
B
to the position.
10. Move switch tap
A
to the position.
10.1 Move switch tap
C
to a medium stir-
ring stage.
11. Control terminal / AMASPRAY
+
: Enter the
"target rate" value for the required spray
rate or check the stored value.
AMASET
+
: Manual operation HB: Set the
calculated spray pressure.
12. Run the pump at pump operating speed
(min. 400 rpm).
13. Select the right tractor gear and move off.
14. Switch off spraying via the operating termi-
nal.
Fig. 115
156 UF BAG0012.11 04.19