18. Press the ejector holder
3
together.
19. Pull off the ejection wheel
2
.
The number on the ejection wheel must be the
same as the number of holes on the singling disc
1
. Deviating from this, the singling disc for squash
requires an ejection wheel for the singling disc with 42
holes.
20. Install the desired ejection wheel.
CMS-I-00002072
For singling discs
1
with 1 mm, 1.3 mm and 1.6 mm
holes, a narrow hole covering roller
2
is required.
21. Remove the nut
3
.
22. Remove the wide hole covering roller.
23. Install the narrow hole covering roller
2
.
24. Put on the nut.
CMS-I-00003868
25. Align the guide pin
1
.
26. Close the cover
2
.
27. Close the locks.
2
1
CMS-I-00001913
6 | Preparing the machine
Preparing the implement for operation
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
91
Summary of Contents for Precea 4500-2
Page 255: ......
