MD 199
Risk of accident if the hydraulic system pressure
is too high
Only couple the implement to tractors with a
maximum tractor hydraulic pressure of 210 bar.
CMS-I-00000486
4.6 Rating plate on the implement
1
Implement number
2
Vehicle ID number
3
Product
4
Permissible technical implement weight
5
Model year
6
Year of manufacture
1
4
5
2
3
6
CMS-I-00004294
4.7 Compressed air fan
NOTE
When the fan is operated with the tractor PTO
shaft, excess grease can emerge from the drive
bearings during the initial operating hours. A light
film of oil is formed after the initial warm-up. After
that, grease or oil may no longer emerge.
The compressed air fan
1
produces overpressure,
which causes the seed grains to adhere to the
singling discs. Depending on the equipment, the fan
is driven by the tractor PTO shaft or a hydraulic
motor. The overpressure is set through the fan
speed. Depending on the implement equipment, the
overpressure is displayed by a pressure gauge or the
control terminal.
1
1
CMS-I-00001943
CMS-T-00004505-G.1
CMS-T-00001782-B.1
4 | Product description
Rating plate on the implement
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
32
Summary of Contents for Precea 4500-2
Page 255: ......
