4.8 Variable telescoping
The individual seeding coulters are connected with
braces
1
and
3
. The row spacing is adjusted with
the linch pin
2
. For the smallest row spacing, the
implement is fully telescoped in. Positions
A
to
F
increase the row spacing in steps of 5 cm.
CMS-I-00002709
Implements with the section
1
can be telescoped in
steps from 50 - 80 cm.
Implements with the section
2
can be telescoped in
steps from 45 - 75 cm.
CMS-I-00002710
4.9 Grain singling unit
4.9.1 Layout and function of the grain singling unit
The grain singling unit singles the seed with
air overpressure. The spread rate determines the
required grain spacing. The spread rate is set
by selecting the singling discs and adjusting the
singling disc speed. Depending on the implement
equipment, the speed of the singling discs is set
in the mechanical setting gearbox or on the control
terminal. Each grain singling unit has its own seed
hopper. The seed flows through the inlet opening in
the grain singling unit.
CMS-T-00003716-A.1
CMS-T-00001990-E.1
CMS-T-00001773-C.1
4 | Product description
Variable telescoping
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
33
Summary of Contents for Precea 4500-2
Page 255: ......
