1.
Lift the implement.
2.
Secure the tractor and implement.
3.
Remove the nut and washer
1
.
4.
Remove the bolt
6
.
5.
loosen the nut
2
.
6.
Move the bracket
5
to the desired height.
7.
Install the bolt.
8.
Install the nuts and washers and tighten them.
If the setting range is not enough, install the cutting
disc
4
at the desired height on the bracket.
9.
Remove the nut and washers
3
.
10. Install the cutting disc at the desired height on the
bracket.
11. Install the nut and washer.
12.
To check the setting,
drive for 30 m at working speed and then check
the work pattern.
CMS-I-00005362
6.5.14.4 Adjusting the seed placement depth
NOTE
The adjustment of the seed placement depth must
be adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
CMS-T-00005825-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
114
Summary of Contents for Precea 4500-2
Page 255: ......
