9.4 Emptying the fertiliser metering unit
1.
Switch off the fan.
2.
Release the lock
2
and swivel it downwards.
3.
To take the calibration buckets out of the
parking position on implements with hydraulic
fan drive,
pull out the interlocked calibration buckets
1
to
the side.
or
To take the calibration buckets out of
the parking position on implements with
mechanical fan drive,
pull out the calibration buckets individually to the
side on the left and right.
CMS-I-00001932
4.
To move the calibration buckets into calibration
position on implements with hydraulic fan
drive,
slide the calibration bucket
2
under the metering
unit with the opening facing up.
5.
Hook on the calibration bucket
1
with the
opening facing up and slide it under the metering
unit.
or
To move the calibration buckets into calibration
position on implements with mechanical fan
drive,
slide the calibration buckets individually under the
metering units from the left and right.
CMS-I-00001931
6.
To move the calibration flap lever to the
calibration position,
press and hold the lock button
1
and push it
down
2
.
7.
To move the bottom flap lever to the emptying
position,
press and hold the lock button
3
and push it
down
4
.
8.
Take out the residual quantity.
3
1
4
2
CMS-I-00001994
CMS-T-00003599-B.1
9 | Parking the machine
Emptying the fertiliser metering unit
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
186
Summary of Contents for Precea 4500-2
Page 255: ......
