6.5.8.3 Actuating the track marker
NOTE
The automatic set changer for implements with
Profi control is only active when the implement
has reached a speed > 2 km/h in working
position.
1.
Press the track marker
1
against the rubber
block.
The transport lock is relieved.
2.
Swivel back the transport lock
2
.
3.
Repeat the procedure for the second transport
lock.
4.
Put the "yellow" tractor control unit in float
position.
The track marker is lowered.
5.
If the wrong track marker is lowered,
apply pressure to the "yellow" tractor control unit
once again.
The track marker is lifted and the shuttle valve
activates the opposite track marker.
6.
Put the "yellow" tractor control unit in float
position.
The opposite track marker is lowered.
1
2
CMS-I-00001906
6.5.9 Preparing the wheel mark eradicator for operation
6.5.9.1 Adjusting the working depth of the wheel mark eradicators
IMPORTANT
Increased wear of the wheel mark
eradicator bracket
When the overload safety is triggered at
short intervals,
reduce the working depth.
Change to a wheel mark eradicator coulter
that is easy to pull.
CMS-T-00001926-A.1
CMS-T-00001816-F.1
CMS-T-00001486-E.1
6 | Preparing the machine
Preparing the implement for operation
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
83
Summary of Contents for Precea 4500-2
Page 255: ......
