4.
Install the press roller with the bolt
2
in the hole
3
.
5.
Put on the nut and tighten it.
Blocking the depth control wheels
Remove the depth control wheels
1
and clean
them
or
If the predominant operating conditions do
not allow for continuous operation of the
implement,
replace the depth control wheels with closed rim
with depth control wheels with open rim.
1
175 Nm
CMS-I-00005302
Clean the depth control wheels
or
If the predominant operating conditions do
not allow for continuous operation of the
implement,
replace the depth control wheels with open rim
with depth control wheels with closed rim.
Stopping of one or several singling discs
CMS-I-00002695
CMS-T-00007530-B.1
CMS-T-00003677-B.1
8 | Eliminating faults
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
180
Summary of Contents for Precea 4500-2
Page 255: ......
