Seed is not caught and jumps out of the furrow
NOTE
If the seed collides against the catch roller
1
or
the seed furrow
2
, it is not reliably caught. The
position of the catch roller can be adjusted.
The position of the catch roller must be adjusted
by trained specialist personnel.
Contact your specialist workshop.
CMS-I-00001925
Control terminal shows a spread rate error
1.
Remove the spring cotter pin
1
.
2.
Press the shot channel
2
down against the
spring element
3
.
3.
Remove the shot channel upwards.
4.
Clean the shot channel.
5.
Install the shot channel.
6.
Secure the shot channel with a spring cotter pin
1
.
2
1
3
CMS-I-00002040
Blocking of the press rollers
NOTE
Offset installation is not possible in conjunction
with disc closers.
1.
Unscrew the nut
1
and remove it.
2.
Remove the press roller.
3.
To increase the throughput on the press rollers,
install the press roller with offset.
1
2
3
CMS-I-00002041
CMS-T-00002347-C.1
CMS-T-00002348-B.1
CMS-T-00002373-B.1
8 | Eliminating faults
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
179
Summary of Contents for Precea 4500-2
Page 255: ......
