MAWA-300B
4. Explanation of Screens
4-25
operated correctly. Only WELD2 setting cannot be performed. “E11 SET
ERROR” will occur.
Remarks
z
If the value less than the effective digits for the time set value is input, it is rounded off
when the screen is switched from the Welding condition setting screen to the Monitor
screen to establish the set value. For example, when “100.5” ms is input, the
effective digits for 100 ms or more is 1 ms, the set value is automatically corrected to
“100” ms when the screen is switched from the Welding condition setting screen to the
Monitor screen.
(d) SCH TYPE CHG
The welding condition setting mode is changed over to the SIMPLE mode.
The SIMPLE SETTING screen is displayed.
[Initial value: SIMPLE]
(e) Screen feed switch
The Schedule setting screen (2/2) is displayed.
(f) Screen return switch
The Schedule setting screen (1/2) is displayed.