MAWA-300B
5. Welding
5-9
(5) -2. Upper/lower limit value setting
The upper/lower limit value setting will be described below.
Set the upper/lower limit value to be used for a welding OK/NG judgment on the Upper/lower limit set
screen.
Remarks
y
For the upper/lower limit value setting to be used for OK/NG judgment using the envelope
waveform, refer to “4. (4)
2
Envelope setting screen.”
1
Displaying the Upper/lower limit set screen
1. Press
on the Monitor select screen.
The Upper/lower limit set screen is displayed.
For the details of the Upper/lower limit set screen,
refer to “4. (12) Upper/Lower Limit Set Screen.”