CHAPTER 7: SPECIAL FEATURES
2 KHZ INVERTER WEDLING POWER SUPPLY
7-8
990-057
LANGUAGES (Figure 7-8)
The
HELP
screen instructions can be displayed in either English or French. To select the language of your
choice, select the
LANGUAGES
option with the or key and use the
CHNG
key to toggle between either
ENGLISH
or
FRENCH
.
WELD COUNTER
The Power Supply contains one standard weld counter and three additional weld counters if the Built-in
Weld Sentry has been added to the Power Supply.
1
Press
MENU
from the
Run
or
Program
States to select the
MAIN MENU
screen
2
Select
WELD COUNTER
. The
WELD
COUNTER
screen will appear.
3
Select the weld count number for
TOTAL
NUMBER OF WELDS
. This counter
increments each time a weld is made in
any weld schedule.
4
To set any counter to zero, select the
count number and then press the 0
number key. If you accidentally reset the
wrong counter, press
CHNG
before
leaving the Weld Counter screen and the
original count will reappear.
5
Refer to Manual 990-291 for detailed
information on the Reject Low, Reject
High, and Accept Weld counters.
6
Press
MENU
to return to the
MAIN MENU
screen or press
RUN
to return to the Weld Graph
RUN
screen.
