2 KHZ INVERTER WEDLING POWER SUPPLY
viii
990-057
SAFETY NOTES
General
This instruction manual describes the operation and maintenance of the Power Supply and
provides instructions relating to its safe use. Procedures described in this manual
must
be
performed as detailed by
Qualified
and
Trained
personnel.
For
Safety
, and to effectively take advantage of the full capabilities of the Power Supply,
please read this instruction thoroughly
before
attempting to use it.
After reading this manual, retain it for future reference when any questions arise regarding
the proper and
safe
operation of the Power Supply.
Operation
Procedures other than those described in this manual or not performed as prescribed in this
manual, may expose personnel to
electrical shock
or
DEATH
.
When operating any welder,
always
wear appropriate personal protective gear.
Maintenance/Service
Use the appropriate tools for terminating the connecting cables, being careful not to nick
the wire conductors.
Do
not
modify the Power Supply without prior written approval from AMADA WELD
TECH.
DANGER
DEATH ON CONTACT
may result if personnel fail to observe the safety
precautions labeled on the equipment and noted in this manual.
Contact with high voltages present in this Power Supply may cause serious
or fatal injuries.
Please read the manual completely and note all cautions and
warnings before attempting to install, operate or maintain the Power Supply.
WARNING
Always
wear safety glasses when welding to avoid eye injuries.
