CHAPTER 3: WELDING SYSTEM SET-UP
2 KHZ INVERTER WEDLING POWER SUPPLY
3-18
990-057
5
Select
TRANSFORMER MODEL
. The
TRANSFORMER MODEL
screen appears.
6
Select
MULTIPLE HEADS: OFF
. If the
display reads
ON
, press
CHNG
until OFF
is displayed.
7
Select
HEAD 1: X3/4000-230
. The IT-
X3A/230 is the default Transformer
Model. Press
CHNG
until the correct
Transformer Model that you have
purchased appears.
8
Press
MENU
to return to the
MAIN MENU
screen.
9
Select
OPTIONS
. The
OPTIONS 1
or
OPTIONS 2
screen appears. This
example shows the
OPTION 1
screen.
10
Press
◄►
to select the
OPTIONS 2
screen.
11
Select
WELD HEAD TYPE: AUTO
. Press
CHNG
until the
MANUAL
option appears.
NOTE:
FOOTSWITCH TYPE: AUTO
will
automatically change to
NONE
.
12
Select
FOOTSWITCH WELD ABORT: ON
.
Press
CHNG
until the
OFF
option
appears.
13
Press
RUN
to return to the Weld Graph
RUN
State.
14
Set the Power Supply front panel
WELD/NO WELD switch to WELD.
15
Make a test weld by pressing on the Weld Head foot actuator until the Power Supply fires. The
default WELD time of 1 ms and the default CURRENT of 0.5 KA may not be sufficient to make
a good weld.
16
Press
PROG
. Use the vertical cursor
keys
▲▼
to increase the weld
CURRENT. Use the horizontal cursor
keys
◄►
to increase or decrease the
WELD time. In this example, weld
CURRENT has been increased to 0.7
KA and WELD time has been increased
to 0.5 ms.
