CHAPTER 4: CONTROLS
2 KHZ INVERTER WEDLING POWER SUPPLY
990-057
4-3
Power Supply - Rear Panel Inputs and Outputs
Figure 4-2. Power Supply Rear Panel
•
POWER
- Refer to
Chapter 2, Power Line Voltage, Current, and Wire Size Requirements,
for
complete instructions on how to properly apply power to the Power Supply.
•
FUSES F1, F2
- Refer to
Chapter 2, Power Line Fuse Requirements
for complete
specifications for Power Line Fuse sizes.
•
SENSING PORT
The Sensing Port contains both input and output lines for communicating to the Transformer and
the MA-600 Multiple Weld Head Selection Box. The connector attached to the end of the
Sensing Port Cable is a 16 pin Honda connector, Part #: MC16LSF. This connector mates with
the connector on the Transformer. As of the time of this revision, the Honda connector is no
longer being manufactured and there is no available substitute.
