CHAPTER 1: DESCRIPTION
SERIES 300 FAST RESPONSE WELD HEAD SYSTEM
990-115
1-3
Section II: Components
Equipment Description
The Series 300 Fast Response Weld Head System consists of either the Model 301H or 302H Linear
Actuator Module (figure 1-1) and the Model 350C Electronic Weld Head Control (figure 1-2). The Model
301H Actuator (shown) has an in-line electrode. The Model 302H Actuator has an offset electrode.
Additional equipment required but not supplied includes the appropriate welding transformer model, high-
frequency resistance welding power supply, and a two-level foot switch. The system equipment is listed in
table 1-1. In addition, an MK301 (in-line) or MK302 (off set) stand is available for mounting the Actuator
Figure 1-1. Model
301H Linear Actuator
Module (Typical)
Figure 1-2. Model 350C Electronic Weld
Head Control
NOTE:
For clarity of communication throughout this manual, it is assumed you are using the HF2 Welding
Transformer, HF2 Power Supply (with appropriate transformer), HF25 Power Supply, or UB25 Power
Supply, and the FS2L Foot Switch with your Weld Head System. If you are using equivalent equipment,
please refer to the manufacturer’s manuals for information about that equipment.
Summary of Contents for 300 Series
