CHAPTER 3: OPERATING INSTRUCTIONS
SERIES 300 FAST RESPONSE WELD HEAD SYSTEM
990-115
3-9
The MAIN MENU Screen
You set up the program options for the Weld Head
Control through a menu system, as presented on the
MAIN MENU screen. The options are normally set
up during installation, and they affect the operation
of the system regardless of which schedule you
select.
Like a tree with many branches, there are multiple
menu levels. You access each new menu level by selecting an option and pressing the [ENTER] key. To
return to a menu level, you press the [MENU] key.
Press the [MENU] key on the Weld head Control front panel to access the MAIN MENU. Use the
[
►◄▲▼
] keys to select a topic (for example,
#
OPTIONS or
#
CALIBRATION), then press [ENTER] to
go to the menu screen of the selected topic.
The
■
OPTIONS Selection
The Weld head Control makes twelve different system options available to you through three screens:
OPTION 1, OPTION 2, and OPTION 3. Most of these programmed options allow you to modify how
an external input, such as a foot switch, interfaces with the Weld Head Control. Output relay options
allow you to interface the Weld Head Control with an external computer or Programmable Logic
Control (PLC).
1 From the MAIN MENU screen, select
#
OPTIONS. The OPTIONS 1 screen
appears. Five option items appear as shown.
POWER UP SCHEDULE:
This option
determines which weld schedule will be used
when the Weld Head Control is switched ON:
either (a) Schedule Number 0-127, or (b) the
weld schedule that was selected just before the power was switched OFF. To select (a) or (b):
(a)
Press [CHNG] to select 000, then key in the weld schedule number that you want the Weld
Head Control to display on power up, or
(b)
Press [.] to change a specific weld schedule to
LAST.
MAIN MENU
■
OPTIONS
■
CALIBRATION
■
WELD COUNTER
■
RESET TO DEFAULTS
■
COPY A SCHEDULE
■
COMMUNICATIONS
■
SYSTEM SECURITY
■
INSTALLATION
■
SYSTEM HELP
◄▲▼►
Select then ENTER
OPTIONS 1
POWER UP SCHEDULE
: LAST
END WELD BUZZER
: OFF
KEY CLICK
: ON
RELAY 1 ON CONDITION
: ALARM
RELAY 2 ON CONDITION
: ALARM
◄▲
Select, . LAST, NUMBERS Change, More
►
Summary of Contents for 300 Series
