Alvarion BreezeACCESS Wi2, System Manual

Page: 82 / 252

60 BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Chapter 4 - Getting Started
4.1 Introduction
This chapter walks you through the steps needed to initially configure the AP in autonomous mode
and establish a connection through the AP to the Internet.
If you are using the AP in its default controlled mode in which it is managed by an Wi² series service
controller, see a Wi² Series Quickstart and “Working with controlled APs” in the Wi² Series Admin
Guide.
Although the screen images here are taken from the Wi² AP, the procedures apply equally to the Wi²
AP series, with variations for the ruggedized versions (Wi² AP) noted where they occur. In the
management tool for ruggedized versions, ignore any references to Port 2.