Alvarion BreezeACCESS Wi2, System Manual

Page: 50 / 252

28 BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Chapter 2 - Hardware Installation
2.3.5 Mounting the Wi² Unit
1
With the bottom panel of the unit facing downwards, thread the two 9/16" wide metal bands
supplied through the brackets on the sides of the unit.
2 Rotate the mounting bracket, so that the Wi² faces the Base Station.
3
Secure the Wi² unit to a pole as shown in Figure 2-12 .
2.3.5.1 Mounting the Wi² Using the Tilt Accessory
The Wi² can also be installed on a wall or on a non-vertical pole using an optional tilt accessory kit.
The tilt accessory kit ( Figure 2-13 ) includes:
„
A mounting bracket
„
3 metal bands for attaching the bracket to a pole
„
Screws for attaching the bracket to a wall
To pole mount the Wi² unit:
NOTE
The mounting bracket can be rotated up to 45
o
in any direction.
Figure 2-12: Pole Mounting the Wi²