Alvarion BreezeACCESS Wi2, System Manual

Page: 151 / 252

IP QoS
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 129
7.7.1.1 Settings
„
Profile name: Specify a unique name to identify the profile.
„
Protocol: Specify an IP protocol to use to classify traffic by specifying its Internet Assigned
Numbers Authority (IANA) protocol number. Protocol numbers are pre-defined for a number of
common protocols. If the protocol you require does not appear in the list, select Other and
specify the appropriate number manually. You can find IANA-assigned protocol numbers at
http://www.iana.org .
„
Start port/ End port: Optionally specify the first and last port numbers in the range of ports to
which this IP QoS profile applies. To specify a single port, specify the same port number for
both Start port and End port. Port numbers are pre-defined for a number of common
protocols. If the protocol you require does not appear in the list, select Other and specify the
appropriate number manually.
„
Priority: Select the priority level that will be assigned to traffic that meets the criteria specified
in this IP QoS profile.
.
Figure 7-11: Adding a New IP QoS Profile- Priority: Low
NOTE
To accept traffic on all ports for a specified protocol, set
Start port
to
Other
and
0.
NOTE
It is strongly recommended that you reserve
Very high
priority for voice applications.