Alvarion BreezeACCESS Wi2, System Manual

Page: 130 / 252

108 BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Chapter 6 - Wireless Configuration
least 25 MHz. Consult the Wireless > Neighborhood page to view a list of APs currently operating
in your area.
6.3.1.4 Interval
When the Automatic option is selected for Channel, this parameter determines how often the AP
re-evaluates the channel setting. Select Time of day to have the channel setting re-evaluated at a
specific time of day.
6.3.1.5 Time of Day
When the Time of Day option is selected for Interval, this parameter determines the time of day that
the AP re-evaluates the channel setting. Set hours in the range 0 to 23.
6.3.1.6 Automatic Channel Exclusion List
Used when Automatic is selected under Channel , this parameter determines the channels that are
not available for automatic selection. To select more than one channel, hold down CTRL as you
select the channel names.
6.3.1.7 Distance Between Access Points
(Not available in Monitor mode)
Use this parameter to adjust the receiver sensitivity of the AP only if:
„
You have more than one wireless AP installed in your location.
„
You are experiencing throughput problems.
In all other cases use the default setting of Large.
If you have installed multiple APs, reducing this AP's receiver sensitivity:
„
Helps to reduce the amount of cross-talk between the wireless stations to better support roaming
clients
„
Increases the probability that client stations connect with the nearest AP
6.3.1.7.1 Available settings
„
Large: Accepts all clients.
„
Medium: Accepts clients with an RSSI greater than 15 dB.
„
Small: Accepts clients with an RSSI greater than 20 dB.