Alvarion BreezeACCESS Wi2, System Manual

Page: 165 / 252

SOAP
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 143
8.3.1.1.4 TCP Port
Specify the number of the TCP port that SOAP uses to communicate with remote applications.
Default is 448.
8.3.1.2 Security
Use these settings to control access to the SOAP interface.
„
Allowed addresses : List of IP address from which access to the SOAP interface is permitted. To
add an entry, specify the IP address and appropriate Mask , and then select Add.
„
When the list is empty, access is permitted from any IP address.
„
Active interfaces : Enable the checkboxes that correspond to the interfaces from which to allow
access to the SOAP interface.
8.3.1.3 Security Considerations
„
The SOAP server is configured for SSL/TLS mode, and the use of a X.509 client certificate is
mandatory for SOAP clients.
„
The SOAP server is configured to trust all client certificates signed by the default Alvarion
SOAP CA installed on the AP.
„
Users should generate and install their own SOAP CA private key/public key certificate to
protect their devices from unauthorized access. This is important because the default SOAP CA
and a valid client certificate are provided as an example to all customers. (See “Managing
Certificates” on page 161 .)