Alvarion BreezeACCESS Wi2, System Manual

Page: 87 / 252

Configuration Procedure
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 65
5 At the password prompt it is recommended that you change the password. Specify the new
password and select Save . The management tool home page opens.
Key elements of the management tool user interface are defined as follows:
By default, the AP operates as a DHCP client to obtain its IP address from a DHCP server.
1 Remove the cable and connect the AP with a standard Ethernet cable to the network on which it
will be used. The network must have a DHCP server and an Internet connection. Broadband
routers typically include a DHCP server.
Ruggedized version: Remove the crossover cable, and using a standard Ethernet cable connect
the PoE injector Data In port to the network on which the AP will be used. The network must
have a DHCP server and an Internet connection. Broadband routers typically include a DHCP
server.
NOTE
Instructions to select specific elements and menus are specified in the form:
Select
Network > Ports
. This instructs you to select the
Network
main menu, and its
Ports
sub-menu.
Figure 4-4: Main Page
To test the wireless network