10
FITTING THE GAS CYLINDER TO THE APPLIANCE
This appliance is only suitable for use with LPG. This appliance
is fitted with a 2.8kPa low pressure regulator.
BEFORE USE PLEASE CHECK FOR LEAKS
Never check for leaks with a naked flame, always use a soapy
water solution.
1. Ensure the gas cylinder is turned off,
2. Open the cabinet doors.
3. Load the cylinder into the cabinet
4. Connect the regulator to the cylinder
5. Check all the connections for gas leakage
(see Leak Test on following page)
REGULATOR AND HOSE
Use only regulators and hose approved for LPG in accordance to
the South African National Standards. The use of the wrong
regulator or hose is unsafe; always check that you have the
correct items before operating the barbecue.
The length of the hose must be 1.5 meters (maximum). Worn or
damaged hose must be replaced. Ensure that the hose is not ob-
structed, kinked, or in contact with any part of the barbecue other
than at its connection. The hose should not be twisted or kinked
when attached to the gas cylinder. No part of the hose should
touch any part of the appliance.
STORAGE
FIXINGS
Annual checking and tightening of metal fixings is recommended.
STORING YOUR BBQ
Store your BBQ in a cool dry place. After having cleaned the
burners, cover them with aluminium foil in order to prevent
insects and other debris collecting in burner holes. THE GAS
CYLINDER SHOULD BE DISCONNECTED AND STORED
OUTDOORS OR IN A WELL VENTILATED AREA. When using
the barbecue after extended periods of storage, please take note
once again of the care, maintenance and safety instructions.
Summary of Contents for SPHINX
Page 2: ......