Alva SPHINX, Instructions Manual, Page: 10 / 25

7
6. When the burner has lit, the burner rate can be adjusted by
turning the knob anticlockwise to any position between the
full and low rate positions.
7. To turn the burner ‘OFF’. If the side burner is no longer
required, or if you have finished cooking, please turn the
cylinder valve and regulator switch to the ‘OFF’ position and
then turn all the control knobs on the appliance clockwise to
the ‘OFF’ position.
REAR BURNER IGNITION
1. Before using the back burner, please assemble the
rotisserie and motor and remove the warming rack. The
warming rack must always be removed when lighting the
back burner.
2. Turn knob ‘A’ to maximum then depress and hold for 10
seconds. Then push ignition button 'B' to ignite the pilot
flame. Once the pilot flame is alight, keep knob depressed
for another 10 seconds to allow the flame safe valve to open
and light the rear ceramic panel. Turn to desired setting. The
rear burner is not to be used at the same time as the bbq
burners.
An “AAA” battery is required for the electronic ignition
of the back burner system.
After use, first turn OFF the gas control valve at the cylinder and
then turn ALL control knobs to the OFF position.