FLASHBACK (FLAME IN BURNER TUBE)
In the event of flash back whilst the BBQ is in use, turn all the
controls and the cylinder valve to the ‘OFF’ position. Wait 5
minutes before attempting to relight the BBQ. If the problem
persists, check for blocked venturi ports by removing the burner
and cleaning with compressed air or with a pipe cleaner. Replace
burner correctly.
If problem persists do not try to rectify the problem yourself as
this could result in serious injury and/or property damage. Store
the appliance in a clean and dry environment. Do not store your
gas cylinder indoors. Store in a well ventilated area away from
direct sunlight or an electrical source.
Light the burners in the same method, in order from left right.
The burner will cross-ignite from the burner to it’s left. Adjust to
the required heat setting.
END OF COOKING OPERATION
After each cooking session, turn the BBQ burners to the HIGH
position and burn for 5 minutes. This procedure will burn off
cooking residue, thus making cleaning easier. The hood must be
open during this procedure.
Turning off your BBQ.
When you have finished using your BBQ, turn off the gas at the
cylinder valve, and then ensure that all the control valves are
turned to the OFF position in sequence starting from the left hand
and moving to the right hand side of the unit. Wait until the BBQ
is sufficiently cool before closing it’s hood or lid.
GAS CYLINDER
A 9kg ALVA gas cylinder with a 5/8 inch BSP left hand thread is
recommended. This will match the supplied regulator. Cylinders
must be stored in an upright position, in a well ventilated and
damp free area and out of reach of children.
The cylinder must never be stored where temperatures can reach
or exceed 50’C. Do not store the cylinder near open flames, pilot
lights or any other sources of ignition. DO NOT SMOKE WHILE
HANDLING THE CYLINDER.
9
Summary of Contents for SPHINX
Page 2: ......