Altrad BELLE RTX, Operator'S Manual

Page: 32 / 340

32
On-Site Transport
The RTX Rammer may be moved vertically by 2 people, laid on the Transport Roller (if
¿
tted) and pulled using the Lifting Handle or by
using a Sling or Hoist on the Lifting Eye. NOTE:- A sling or hoist must not be used on the Lifting Handle.
Alternatively, use the optional Wheel Kit - see below for details.
Road Transport
The RTX Rammer must be transported as far as possible standing up, strapped to the body side board of the truck, or strapped inside
a lorry (panel truck). If not possible, it may be laid down only on the Transport Rollers or front bar of the Operating Handle, in stable
position and strongly strapped down to guard against rolling or sliding.
Transport
Please ensure that you have read and fully understand the information below before attempting to
transport the RTX Rammer.
CAUTION
Lifting
Eye
Transport
Roller
Lifting
Handle
Wheel Kit Option
1. Place the Wheel Kit under the lip of the plate on the lower Ramming Leg.
2. Once the Wheel Kit is engaged, tilt the Rammer backwards slightly until the Wheels take the weight of the Rammer.
3. ONLY moving the Rammer backwards, transport to the required location.
DO NOT leave the Wheel Kit engaged whilst unattended or during operation as this will make
the Rammer unstable. For transportation purposes only!
WARNING
1
2
3