54
-EN
01GB05INA-W900E.fm
ALPINE INA-W900E 68-16909Z25-A (EN)
Hands-Free Phone Control
Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible mobile phone with this unit.
•
Avoid performing a hands-free call in heavy traffic or on narrow or
winding streets.
•
Close the windows while calling to reduce background noise.
•
If both calling parties are using hands-free devices, or the call is
made in a noisy location, difficulty hearing the other person’s voice
is normal.
•
Depending on telephone line conditions or certain mobile devices
used, voices may sound unnatural.
•
When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
•
Certain mobile phone features are dependent on the capabilities and
settings of your service provider’s network. Additionally, certain
features may not be activated by your service provider, and/or the
provider’s network settings may limit the feature’s functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well
as the information contained in the Owner’s Manual are based upon
the latest available information and are believed to be accurate at
the time of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
Answering a Call
Incoming calls are announced by the received call ring tone and a
displayed message (Caller name/PHONE No.).
Touch
[
]
.
The call starts.
•
Indicator
(Signal Strength):
While calling, the indicator will display the current signal strength of
mobile phone. While in the mode other than Calling, the unit cannot
read the signal strength of the mobile phone exactly. In this case, the
indicator displays the signal strength of last call.
•
When “Setting the Received Calls automatically (Auto Answer)”
(page 53) is set to ON, you can receive a call automatically.
•
While calling, the source sound on the unit is muted.
After calling, playback will resume.
Hanging up the Telephone
Touch
[
]
.
The call finishes.
Adjusting the volume when receiving a
Call
While calling, you can adjust the volume. The adjusted volume level is
stored.
Press
/
on the unit to adjust the volume.
•
You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result
in feedback. If feedback is noticed as feedback is directly related to
the volume, turn down the volume as low as acceptable to eliminate
it. Positioning the microphone in a direction away from the main car
speakers (e.g. clipped on sun visor) may also reduce feedback at high
volume.
Redial Function
You can redial the person you have previously called.
After finishing a call, touch
[
]
on the screen within
5 seconds.
The telephone is redialed.
Call Switching Operation
While making a call, this function allows you to initiate the transfer of
the audio between the mobile phone and the speakers in the car.
While calling, touch
[
]
to switch the call sound
between the unit and mobile phone.
•
Depending on the mobile phone, this operation may not be
performed.
Call History
Call History is recorded for the last dialed/received/missed calls. There
are various ways of making calls based on the “Call History”. The
following steps 1 to 3 are common to the various ways of making these
calls. For details, refer to each individual category for making calls.
1
Press and hold
MUTE/PHONE
for at least 2
seconds.
The Telephone Menu screen is displayed.
2
Touch
[
]
of
the desired item to place the call.
Setting items:
DIALED CALLS / RECEIVED CALLS / MISSED CALLS /
PHONE BOOK / DIAL INPUT / VOICE DIAL
•
The adapter will update the information in the Call History
automatically each time a mobile phone is connected or receiving/
dialing a call. At this time, if you select any outgoing mode, “NOW
UPDATING” will be displayed.
•
It may take some time for the list to be displayed, and also directly
after connection, the list may not be brought up to date.
3
Touch
[
]
to return to the previous screen.
Touch
[
ESC
]
to return to the main source screen that was
displayed before the setup operation was started.
•
If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.
About the Hands-Free Phone
01GB00INA-W900E.book Page 54 Monday, September 13, 2010 9:52 AM